Limewash isn't like latex paint, and it doesn't want to be cleaned like latex paint. Here's how we tell Manhattan clients to live with their limewashed walls — what to dust, what to dab, what never to scrub, and when a scuff is a five-minute fix versus a call to your painter.
Read More
A Harlem brownstone interior is a different animal from a condo: original plaster, carved mantels, pocket doors, and a hundred years of paint history under every coat. Here's how a careful painting job restores these rooms without wrecking the history.
Read More
SoHo lofts are some of the most rewarding interiors to paint in all of Manhattan — and some of the trickiest. A working painter's guide to 12-foot ceilings, cast-iron columns, exposed brick, and the colors that actually work in deep loft floor plates.
Read More
Gramercy Park is Manhattan's quietest corner — a locked two-acre garden ringed by 1840s townhouses — and its interiors run on elegant neutrals. A working painter's guide to the warm whites, greiges, and historic colors that suit them.
Read More
Limewash looks made for pre-war Upper East Side apartments — and mostly it is. But the plaster under decades of latex paint, the co-op board's paperwork, and the way the finish cures all change what the job looks like.
Read More
Chelsea invented the gallery-white apartment. If you're painting one of its lofts, co-ops, or townhouses, here's how Chelsea apartment painters get those tall white walls to look flawless — the right white, the prep work, and the light.
Read More
Greenwich Village apartments pair 200-year-old bones — Federal row houses, tenement moldings, marble mantels — with the finishes of right now. A working painter's guide to the colors, sheens, and prep that make historic Village interiors work.
Read More
Murray Hill runs on lease turnover — recent grads, analysts, and UN staff painting their first real apartments between 34th and 40th Streets. A working painter's guide to the renter's rulebook, 2026 costs, renter-safe colors, and finishes that survive real life.
Read More
A limewashed living room does something flat paint can't do in a SoHo or Tribeca loft: it softens brick, beams, and twelve feet of wall without hiding the building underneath. This guide covers where limewash works, which colors hold up, prep, and upkeep.
Read More
Manhattan's pre-war apartments were built with plaster walls, and limewash was built for plaster walls — both are mineral, both breathe, and limewash bonds with plaster instead of sitting on top of it. This guide covers what kind of plaster your building actually has, why breathability matters in a 100-year-old wall, when plaster needs repair before any finish goes on, and how a limewash job on plaster really runs.
Read More
Almost no NYC apartment wall is bare plaster anymore — it's latex paint over plaster, or latex over drywall, sometimes ten coats deep. Limewash can still go over it, but only with the right primer underneath. This guide covers which primer, how prep changes for flat versus glossy paint, the painted-brick exception, and the lead-paint rule that matters in pre-war buildings.
Read More
A limewash job in a Manhattan apartment usually lands well above a standard repaint, because the finish is brushed on by hand in thin coats and the prep is fussier. Here's what drives the price room by room, what the materials cost, and where you can save without wrecking the finish.
Read More
Limewash and whitewash sound like two names for the same pale brick finish, but in a Manhattan apartment they behave very differently. One is a mineral finish that bonds with bare brick; the other is usually thinned paint sitting on top of it. Which one belongs on your wall comes down to what your brick already has on it, and how much of the brick you still want to see.
Read More
Limewash isn't just flat paint with a fancy name. It's crushed limestone, water, and mineral pigment that turns back into stone on your wall — and in a pre-war Manhattan apartment with real plaster, that difference shows. Here's what it is, what it costs, how it goes on, and the rooms where we'd talk you out of it.
Read More
Hell's Kitchen runs on railroad flats — rooms in a line, no hallway, light at both ends and a dark middle room. A working painter's guide to the color ideas that actually work in them: one warm white down the whole train, how to handle the windowless middle room, and the color-drenching trick that erases the tunnel feeling.
Read More
Inwood is the northernmost tip of Manhattan — a 196-acre old-growth forest, pre-war rent-stabilized apartments, and the borough's last relatively affordable rents. A working painter's guide to what that means for paint: the plaster, the light, the turnover work, and the colors that actually fit.
Read More
Washington Heights is the rare Manhattan neighborhood where pre-war architecture meets still-reasonable prices. A working painter's guide to what those Beaux-Arts and Art Deco buildings do to a paint quote, where budget-minded owners and renters should spend and save, and what 2026 prices actually look like uptown.
Read More
Battery Park City apartments get more natural light than almost anywhere else in Manhattan — and that changes the rules for paint color. Here's how to pick colors that work with waterfront views instead of fighting them.
Read More
Financial District condos are a different animal — floor-to-ceiling glass, concrete columns, and smooth walls that show every flaw. Our painters break down the sheens, techniques, and condo-board rules that get a sleek, flawless finish in FiDi's modern towers.
Read More
East Village apartments are small, old, and full of character — and the wrong paint makes them feel like shoeboxes. Our painters share the color ideas, light-reflectance tricks, and renter rules that make walk-ups, railroad flats, and tenement studios feel bigger than they are.
Read More